Rep 3.1.3: Lcd Display - Xerox 450c Service Manual

REP 3.1.3: LCD Display

Parts List: 4.1
1. Perform the following:
a. REP 1.1: WorkCentre Cover on page 4-3
b. REP 3.1.1: Control Panel on page 4-27
2. Remove the control panel rear cover. It is
secured with two screws.
3. Disconnect the LCD wiring harness from
connector J1 on the control panel circuit
board (Figure 4-37).
4. Remove the 2 screws that secure the LCD
display to the control panel.
5. Carefully remove the LCD display.
LCD wiring harness
Figure 4-37 LCD display
Xerox WorkCentre 450c/450cp Service Manual
LCD display
www.printcopy.info
Page 4-29