Xerox WorkCentre 5022 Service Manual page 672

Figure 3 j0lj91003
6. Peel off the tape that secures the BTR protective sheet. (Figure 4)
Figure 4 j0lj91004
7. Open the L/H Cover and remove the BTR protective sheet. (Figure 5)
a. Remove the BTR protective sheet.
Installation/Removal
9.1.1 Installation of Main Unit
8. Close the L/H Cover.
9. Shake the Toner Cartridge horizontally several times.
10. Open the Front Toner Cover and install the Toner Cartridge. (Figure 6)
11. Remove the Heat Seal of the Drum Cartridge. (Figure 7)
06/2014
9-4
Figure 5 j0lj91005
Figure 6 j0lj91008
Version 1.0
WC 5022/5024