Rep 56.1.2 Dadf Platen Cushion - Xerox WorkCentre 5022 Service Manual

"Chain Link : 955-828"
Refer to [6.5.2.7 HFSI Counter Clear / Initialize].
Repairs and Asdjustments

REP 56.1.2 DADF Platen Cushion

Parts List on PL 56.1
Removal
When turning OFF the power switch, check that the 'Data' lamp is OFF and that there is
no Job in progress.
Turn OFF the power switch and make sure that the screen display turns OFF.
Check that the power switch is OFF and unplug the power plug.
NOTE: The DADF Platen Cushion is pasted on with double sided adhesive tapes.
1. Peel off the DADF Platen Cushion. (Figure 1)
a. Peel off the DADF Platen Cushion.
Replacement
1. Paste on the DADF Platen Cushion. (Figure 2)
a. Place the DADF Platen Cushion on the Platen Glass.
b. Set up the gap between the Regi Guide and Platen Guide.
c. Slowly lower the DADF to paste the DADF Platen Cushion to it.
06/2014
4-72
WARNING
Figure 1 j0lj45603
Version 1.0
WC 5022/5024