Xerox WorkCentre 5022 Service Manual page 53

016-346 Fax Parameter Incorrect
BSD-ON:-
Parameter Error received from the Fax Board. Self Diagnostic: Parameter Error received.
Cause/Action
1. Turn the power OFF and ON.
2. Print out the Error Report and then replace the Fax PWB (PL 18.5).
3. Re-send the Fax or request for the customer to receive one.
Version 1.0
WC 5022/5024
016-372 File Access Error
BSD-ON:-
Unable to access the files that had been stored in the device for some reasons (access
refused, etc.).
Cause/Action
1. Turn the power OFF and ON.
2. Install a firmware with the correct version.
3. If the problem persists, replace the ESS/MCU PWB. (PL 18.3)
06/2014
2-31
Status Indicator RAPs
016-346 Fax Parameter Incorrect