Xerox WorkCentre 5022 Service Manual page 501

Chain-Link NVM Name
752-647 PRC_1_TO_2_PV_CNT
752-679 PRC_TONER_REST
752-686 PRC_RECOVERY_CNT
752-732 PRC_DISP_MOTOR_FAIL_FLAG
752-740 PRC_SEAL_DETECT_FLAG
752-746 PRC_DELTA_ATC_TARGET_SETUP_CORR
Version 1.0
WC 5022/5024
Table 1 NVM PROCON
Setting Setting
Range Range
(Minimum (Maximum Default Write Yes/
Value) Value) Value No
0 429496729 0 Enabled
5
0 100 100 Enabled
0 255 0 Enabled
0 1 0 Enabled
0 1 0 Enabled
-128 127 0 Enabled
06/2014
6-73
Initializatio
n Yes/No Description
Enabled 1 to 2 PV count
Enabled Remaining Toner %
Enabled Recovery count
Enabled DispenseFailFlag
0: Has not occurred, 1: Occurred
Enabled Seal Not Pulled Off Detection Flag
Enabled Delta ATC Target Setup Correction Amount
6.3.14.2 NVM PROCON
General