Xerox WorkCentre 5022 Service Manual page 543

10. Repeat the procedure until the [NVM value] of the [NVM Read / Write] screen displays
[000].
Version 1.0
WC 5022/5024
6.5.2.15 DADF Size Detect Auto Adjust
Purpose
To automatically adjust the original size during DADF scan to the desired original size.
Procedure
1. Enter the CE Diag Mode and input 998-930 in the Chain-Link.
NOTE: Inputting 998-930 in the Chain-Link and presssing <Start> for machines that do
not have a DADF will cause an Error to be displayed.
2. Pressing <Start> displays the screen that prompts you to load the originals on the DADF.
NOTE: Load 3 sheets of A4 LEF size originals.
3. Load the originals on the DADF and press <Start>.
4. The DADF Size Detect Auto Adjust will be performed. When this is in progress, the mes-
sage [In progress] is displayed on the UI.
5. When the DADF Size Detect Auto Adjust has completed, [Done] will be displayed.
6. Pressing <Clear (C)> returns you to the [Diagnostics Mode Base] screen.
06/2014
6.5.2.15 DADF Size Detect Auto Adjust
6-115
General