Figure 4 j0mg41903
8.
Remove the Blind Cover. (PL 19.4)
9.
Remove the Rear Cover. (Figure 5)
a.
Remove the screw (x5).
b.
Remove the Rear Cover.
Figure 5 j0mg41904
10. Install the Net I/F PWB. (Figure 6)
a.
Install the Net I/F PWB.
Installation/Removal
9.1.9 Network Print Kit
11. Install the Bracket. (Figure 7)
a.
Install the Bracket.
b.
Secure it by using the screw (x2).
12. Reinstall the parts that were removed in Steps 6 to 9.
13. Plug the power cord into power outlet, and turn ON the power switch.
14. Check the operation of the Network Print Kit.
15. Explain to the customer how to operate the Network Print Kit where necessary.
06/2014
9-24
Figure 6 j0mg41852
Figure 7 j0mg91032
Version 1.0
WC 5022/5024