024-365 Image Output FIFO Error
BSD-ON:-
An image transfer underrun has occurred.
Cause/Action
As CE action, check the output copy and dispose of the paper with image error.
Version 1.0
WC 5022/5024
024-910/911/915 Tray 1/Tray 2/MSI Paper Length Mismatch
BSD-ON: CH8.4
The Paper Size for the applicable Tray is longer by 10.1 mm or more, or shorter by 13.1 mm or
more than the setting.
Cause/Action
Check the following:
•
Check whether the size of the paper loaded in the Tray is the same as the size of the
Paper Guide.
•
Transportation failure due to foreign substance on the document path.
•
The surface of the Feed Roll, T/A Roll 2 (Tray 2), Regi Roll, and Idler Roll of the applica-
ble Tray for foreign substances.
•
The surface of the Feed Roll, T/A Roll 2 (Tray 2), Regi Roll, and Idler Roll of the applica-
ble Tray for wear.
•
The Regi Sensor (Input Check [071-105]) for operation failure. (PL 15.1)
•
The Regi Clutch (Output Check [071-001]) for operation failure. (PL 15.1)
•
The MSI Feed Clutch (Output Check [072-014]) for operation failure. (MSI) (PL 13.3)
•
The BTR for contamination, wear, and transportation failure due to deterioration.
•
The Drive Gear for wear and damage.
•
Usage of out of spec paper.
If no problems are found, replace the ESS/MCU PWB (PL 18.3).
06/2014
2-45
Status Indicator RAPs
024-365 Image Output FIFO Error