Xerox WorkCentre 5022 Service Manual page 79

027-518 Forwarding Login Error
BSD-ON:-
Unable to log in normally to the transfer destination.
Cause/Action
1. Press [Stop] on the UI Panel.
2. Set the login permission at the transfer destination.
NOTE: When performing the operation again, the same Fault will occur if the user had pro-
ceeded without changing the settings.
Version 1.0
WC 5022/5024
027-520 SMB Forwarding Bad Volume
BSD-ON:-
One of the following errors was detected.
• A character string that cannot be set has been specified in volume (shared name, path,
etc.).
• The specified path does not exist.
Cause/Action
1. Press [Stop] on the UI Panel.
2. Review and set the volume or the specified path.
NOTE: When performing the operation again, the same Fault will occur if the user had pro-
ceeded without changing the settings.
06/2014
2-57
Status Indicator RAPs
027-518 Forwarding Login Error