Xerox WorkCentre 5022 Service Manual page 80

027-522 Forwarding Access Error
BSD-ON:-
Write was refused even though the connection to the transfer destination is normal.
Cause/Action
1. Press [Stop] on the UI Panel.
2. Set the write permission at the transfer destination.
NOTE: When performing the operation again, the same Fault will occur if the user had pro-
ceeded without changing the settings.
Status Indicator RAPs
027-522 Forwarding Access Error
027-528 SMB Disk full
BSD-ON:-
Unable to write into the shared folder because the HDD of the PC is full.
Cause/Action
1. Press [Stop] on the UI Panel.
2. Free up some space in the HDD of the PC.
06/2014
2-58
Version 1.0
WC 5022/5024