Xerox WorkCentre 5022 Service Manual page 307

Figure 4 j0lj45621
8. Disconnect the connector of the DADF Feed Clutch and remove the wire harness from
the Harness Guide.
(Figure 5)
a. Disconnect the connector.
b. Remove the wire harness from the Harness Guide.
Figure 5 j0lj45622
9. Disconnect the connector of the DADF Feed Motor. (Figure 6)
a. Disconnect the connector.
Version 1.0
WC 5022/5024
10. Remove the Harness Guide and the wire harness. (Figure 7)
a. Remove the screw and the Ground Wire.
b. Remove the screw.
c. Remove the Harness Guide and the wire harness.
Reference: This shows the removed Harness Guide and wire harness. (Figure 8)
06/2014
4-83
Figure 6 j0lj45623
Figure 7 j0lj45624
Repairs and Asdjustments