Xerox WorkCentre 5022 Service Manual page 475

6.3.8.2 NVM DRIVE & NOHAD
Chain-Link NVM Name
740-001 DRV_MAIN_MOTOR_SPEED
740-002 DRV_MAIN_MOTOR_BRAKE_SWITCH
741-001 NOHAD_PRINT_STOP_DELAY
741-002 NOHAD_STBY_MODE_INTVAL
741-003 NOHAD_STBY_MODE_COUNT_THRESHOL
D
741-004 NOHAD_STBY_MODE_TEMP_THRESHOLD 0
741-005 NOHAD_STBY_MODE_SWITCH
741-006 NOHAD_COLD_MODE_TEMP_THRESHOLD 0
741-007 NOHAD_COLD_MODE_HOLD_TIME
741-026 NOHAD_CONDENSE_SWITCH
741-027 NOHAD_CONDENSE_ENTRY_TEMP_THRE
SHOLD
741-028 NOHAD_CONDENSE_HOLD_TIME
741-029 NOHAD_SMELL_FILTER_SWITCH
741-031 NOHAD_FAN_FAIL_START_TIMER
741-032 NOHAD_FAN_FAIL_SUMPLE_TIME_THRES
HOLD
Version 1.0
WC 5022/5024
Table 1 NVM DRIVE & NOHAD
Setting Setting
Range Range
(Minimum (Maximum Default
Value) Value) Value
1040000 1562000 1496201
0 1 0
15 1800 15
1 20 1
1 20 3
800 245
0 1 1
300 140
0 180 0
0 1 0
0 300 120
0 240 90
0 1 0
0 60 6
10 300 48
06/2014
6-47
Write Yes/ Initialization
No Yes/No Description
Disabled Enabled main motor speed
(Unit: Ref CLK)
Disabled Enabled Main motor brake signal switch
0: Main motor brake signal invaild1: Main motor brake sig-
nal effective
Disabled Enabled The time for Fan high speed rotation after printing has
completed.
(Unit: 1 s)
Disabled Enabled The temperature sampling time for Fusing Fan Tempera-
ture Control.
(Unit: 1 s)
Disabled Enabled The threshold count for determining the mode transition of
the Fusing Fan Temperature Control.
(Unit: 1 time)
Disabled Enabled The threshold temperature for determining the mode tran-
sition of the Fusing Fan Temperature Control.
(Unit: 0.1 Degrees Celsius)
Disabled Enabled Fusing Fan Temperature Control Execution Switch
0: Do not perform, 1: Perform
Disabled Enabled The threshold temperature for determining the Fan Low
Temperature Stop Operation.
(Unit: 0.1 Degrees Celsius)
Disabled Enabled The time to maintain the Fan in low speed rotation for Fan
Low Temperature Stop Operation.
(Unit: 1 s)
Disabled Enabled Condensation Mode Execution Switch.
0: Do not perform, 1: Perform
Disabled Enabled The threshold temperature for determining whether to tran-
sition to the Condensation Mode.
(Unit: 0.1 Degrees Celsius)
Disabled Enabled The time where the transition to the Sleep Mode is prohib-
ited after entering the Condensation Mode.
(Unit: min)
Disabled Enabled Deodorant Filter Availability Switch.
0: No Deodorant Filter, 1: Deodorant Filter available
Disabled Enabled The time where Fail Detection is prohibited after the Fan
operation.
(Unit: 1 s)
Disabled Enabled Fan Fail Signal Accumulated Time.
(Unit: 1 s)
General
6.3.8.2 NVM DRIVE & NOHAD