Xerox WorkCentre 5022 Service Manual page 440

• When the power is turned OFF during liftup, if the power is turned ON again without
removing the Tray, and the Tray is inserted again while the Bottom Plate has not dropped,
the remaining paper amount cannot be detected correctly.
6.1.14.4 Load while RUN
The function that enables loading of paper into a Tray that is not being used while printing is in
progress is available.
General
6.1.15 Tray Size Factory Settings
6.1.15 Tray Size Factory Settings
The Factory Default Size Settings are as follows:
Table 1
Tray
Main Unit Standard 250-sheet Tray
STM 500-sheet Tray
MSI 100-sheet Tray
2TM 500-sheet Tray x2
06/2014
6-12
Size
A4 LEF
A3 SEF
A3 SEF
A3 SEF
Version 1.0
WC 5022/5024