3.3.3 TVM control panel
Figure 3–4: TVM control panel
Run LED
Warning indicator
Left valve position
Right valve position
Column-temperature set
point
Column temperature
Status
You can access these additional functions by right-clicking anywhere in the TVM control panel.
Table 3–7: Additional functions in the TVM control panel
Control panel item
Launch Instrument Console
Reset TVM
Help
Depicts the actual run LED, on the front panel, unless
communications to the TVM are interrupted.
Displays warning indicator icon when you exceed valve cycle
counters.
Displays the current position (position 1 or position 2).
Displays the current position (position 1 or position 2).
Displays the current column set point to 0.1°C resolution. When
active temperature control is disabled, this field reads Off.
Displays the current column temperature to 0.1°C resolution,
even when active temperature control is disabled.
Displays the status of the current operation.
Description
Launches the instrument console.
Resets the TVM after an error condition.
Displays the instrument console's online Help.
November 26, 2019, 715003588 Revision C
Page 56