Audience And Purpose; Quality Control; Emc Considerations; Canada Spectrum Management Emissions Notice - Waters ACQUITY UPC2 System Manual

Symbol
5()

Audience and purpose

This guide provides the user with information for setting up, operating, and maintaining the
ACQUITY UPC
ACQUITY UPC
provided by Waters personnel.
Intended use of the UPC
Waters designed the ACQUITY UPC
pharmaceutical development, discovery, and QA and QC environments, as well as, within the
chemical materials, environmental, and food safety environments. The ACQUITY UPC
not intended for use in diagnostic applications.

Quality control

Routinely run three QC samples that represent subnormal, normal, and above-normal levels of a
compound. If sample trays are the same or very similar, vary the location of the QC samples in the
trays. Ensure that QC sample results fall within an acceptable range, and evaluate precision from
day to day and run to run. Data collected when QC samples are out of range might not be valid. Do
not report these data until you are certain that the instrument performs satisfactorily.

EMC considerations

Canada spectrum management emissions notice

This class A digital product apparatus complies with Canadian ICES-001.
Cet appareil numérique de la classe A est conforme à la norme NMB-001.
Definition
Alternating current
Electrical and electronic equipment with this symbol may contain
hazardous substances and should not be disposed of as general
waste.
For compliance with the Waste Electrical and Electronic Equipment
Directive (WEEE) 2012/19/EU, contact Waters Corporation for the
correct disposal and recycling instructions.
Serial number
Part number catalog number
2
system. This guide is intended for personnel who operate and maintain the
2
system. This guide should be used in conjunction with instruction and training
2
system
2
system to perform normal phase separations in
November 16, 2016, 715004521 Rev. C
Page vii
2
system is