Cm-30S Control Panel - Waters ACQUITY CM-30S Overview And Maintenance Manual

Run LED indications:
LED mode and color
Unlit
Blinking green
Constant green
Blinking red
Solid red

CM-30S control panel

®
If Empower
appears at the bottom of the Run Samples page. If MassLynx
controls the system, the CM-30S's control panel appears at the bottom of the
Inlet Editor window.

CM-30S control panel:

Status
The CM-30S control panel displays the CM-30S status, the program-selected
column, the current temperature in the column compartment, and the column
heater's status or set point. You cannot edit CM-30S parameters while the
system is running.
Description
If both run and power LED are unlit, the CM-30S
is powered off.
If run LED is unlit and power LED is constant
green, the CM-30S is in idle mode.
The CM-30S is initializing or preparing to run a
method.
The program-selected column in the CM-30S is
running a method.
The CM-30S is in error mode.
The CM-30S is in error mode and requires
service.
software controls the system, the CM-30S's control panel
Serial number of the second column
manager (if present) in the system
Run LED
Program-selected column (only
displays when running in
column selection mode)
Current column-compartment
temperature
Column heater status/set point
October 7, 2014, 715004178 Rev. B
CM-30S control panel
®
software
39