Waters ACQUITY UPLC M-Class System Manual page 55

Run LED
Warning indicator
Display console
Column-temperature
set point
Sample-temperature
set point
Sample temperature
Status
You can access these additional functions by right-clicking anywhere in the µSM-FL control panel.
Table 3–6: Additional functions in the µSM-FL control panel
Control panel function
Prime syringes
Wash needle
Turn lights on/off
Reset SM
Help
Depicts the actual run LED on the front panel, unless
communications to the µSM-FL are interrupted.
Displays the warning indicator icon when number of injections
threshold (set by the user) is exceeded.
Launches the instrument console.
Displays the current column-temperature set point to 0.1 °C
resolution (column temperature controlled by the TVM). When
active temperature control is disabled, this field displays Off.
Displays the current sample set point to 0.1 °C resolution. When
active temperature control is disabled, this field displays Off.
Displays the current sample temperature to 0.1°C resolution, even
when active temperature control is disabled.
Displays the status of the current operation.
Description
Displays the Prime dialog box.
See also:
µSample Manager - Fixed Loop Overview and
Maintenance Guide.
Displays the Wash Needle dialog box.
See also:
the µSample Manager - Fixed Loop Overview
and Maintenance Guide.
Lights power-on only when the sample
manager door is open.
Resets the µSM-FL following an error
condition.
Displays the instrument console's online Help.
November 26, 2019, 715003588 Revision C
Page 55
"Priming the µSM-FL" in the
"Washing the µSM-FL needle" in