Table of Contents
Advertisement
Chapter 8 - Workstation Software
STEP 3
Brightness and contrast level readings
The Sharpening and Denoise tools becomes invisible when you press
already been saved. Consequently, the S & D readings are superseded by the
B & C readings:
Figure 8-9: Level tags change to brightness and contrast
8.8.4
Rotation
You can rotate the fluoroscopic images clockwise or counter-clockwise.
To rotate an image:
STEP 1
STEP 2
98
The level readings of brightness and contrast are displayed above
the tool buttons in the form of "
ple, "
".
D:0 C:0
Try the levels and select the one where the image appears accept-
able.
. This is because they are not applicable to the images that have
S - Level of sharpening
D - Level of noise reduction
B - Brightness level
C - Contrast level
Rotate: Rotates the image clockwise.
Rotate: Rotates the image counter-clockwise.
Take a shot to generate a fluoroscopic image, or open an existing
study and then select an image from the image list.
On the control screen, press the Rotation buttons
the tools panel to the left of the image area to rotate the image
clockwise or counter-clockwise.
Note: You can make the image spin constantly by keeping the rotation
buttons pressed down.
Processing Images
B:<VALUE> C:<VALUE>
B6 User Manual
", for exam-
or
on
Advertisement
Table of Contents
