Control Unit Components - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Control Unit Components

3.1 Control Unit Components
The G-Arm system consists of two main units - the Control Unit and the G-
Arm.
The Control Unit is connected to the G-Arm through the interconnect cable.
The G-Arm is powered and controlled by the Control Unit.
1 Exposure lamp
3 Control monitor
5 Control Panel
7 Emergency Stop (one on each side)
9 Control Unit handle (one on each side)
11 Footswitch
13 Keyboard drawer
15 Baffle plate
17 Footswitch holder
19 X-ray switch (AP & LT)
21 Footswitch cable (L3)
23 Storage compartment
25 Network port
XGB6-12-1014, Rev 1.04
Figure 3-1: Components of Control Unit
10
12
14
16
18
20
22
24
Chapter 3 - System Components
2 Viewing monitor (left: AP, right: LT)
4 Monitor handle (one on each side)
6 USB ports
8 Cord hook
Printer compartment
Interconnect cable connector (L2)
Wheel lock pedal
Locking wheel
X-ray switch (AP)
X-ray switch (LT)
Port panel
Power Switch
31