Table of Contents
Advertisement
DICOM Setup
Item Name
Storage_AE
MWL_AE
SR_AE
Printer_AE
Film Size
Image Bit
Compres-
sion Quality
Factor
8.17.3
Set up local host
You need to maintain the connectivity of the G-Arm system if it functions as
an entity of a network.
The local host network properties include the following:
●
Local IP
Specifies the IP address of the G-Arm system.
●
Local Port
Specifies the opened port of the G-Arm system.
XGB6-12-1014, Rev 1.04
Feature
Transfers patient studies to a PACS server.
Registers new patients using information provided by
RIS/HIS.
Transfers the dose report to the DICOM server.
Prints images through a DICOM printer server.
Film sizes the DICOM printer supports (inch): 8×10, 10×12,
11×14, 14×17.
Specifies the color depth of the image, including 8-bit and
16-bit. The default value is 16.
Specifies the level of the image compression quality. The
value is integer, ranging from 0 to 2. Larger number
means higher compression ratio. The default value is 0
(no compression).
Figure 8-21: Bind to a DICOM service
Chapter 8 - Workstation Software
121
Advertisement
Table of Contents
