Table of Contents
Advertisement
Chapter 4 - Mechanical Positioning
STEP 4
STEP 5
STEP 6
4.10
Moving the G-Arm
CAUTION
CAUTION
Figure 4-12: Use only the handles to move the G-Arm
To move the G-Arm:
STEP 1
STEP 2
48
Unlock the wheel brakes on the locking wheels on the Control Unit.
Guide the Control Unit to the destination using the handles indicat-
ed in Figure 4-10 (p53).
When you reach your destination, apply the wheel brakes.
Familiarize yourself with the mechanical operations of all controls
prior to moving the equipment.
It takes two people to maintain control of either unit (Control Unit or
G-Arm) when moving up or down an incline. Do NOT move the unit up
or down stairs or steps. Do NOT lock the unit in place on an incline.
Use the movement line control to minimize the G-Arm height, and
then reset the radial rotation angle of the G-Arm to 0°.
Press the Power On button
Unit to turn off the equipment, and then switch off the circuit
breaker (2 in Figure 2-5 (p32)).
Moving the G-Arm
above the control pane of Control
B6 User Manual
Advertisement
Table of Contents
