Register A Patient From Local Database - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Retrieving Patient/Study Info
8.4.3

Register a patient from local database

All patient information and studies are stored in the G-Arm's database and
can be retrieved at any time.
To create a study using the patient information from local database:
STEP 1
STEP 2
8.5 Retrieving Patient/Study Info
The patient list is where you retrieve the study information of a patient that
has been examined using the G-Arm system. All the patient information, to-
XGB6-12-1014, Rev 1.04
Figure 8-6: Select a patient from the database
Press , and then switch to the Database tab.
The Database tab is displayed, as shown in Figure 8-6 (p97).
On the Database tab, click or tap to select a patient, and then press
Register.
The G-Arm system creates a new study for the selected patient, and
gets ready for fluoroscopic imaging.
Chapter 8 - Workstation Software
91