Table of Contents
Advertisement
Tissue & Bone Features
STEP 2
Ranges of loading factors
The ranges of the loading factor values are listed below:
Automatic Pulse Fluoroscopy (Penetration)
kV
mA
Note: In Half Dose Fluoroscopy mode, the mA will be reduced by half, namely,
15 mA (1-plane imaging) or 15 mA (2-plane imaging).
7.9
Tissue & Bone Features
The G-Arm system provides the Tissue and Bone features specially for soft
tissue and the limb fluoroscopic imaging, which can offer higher degree of
object recognition.
XGB6-12-1014, Rev 1.04
The system prompts you to select a mode, as shown below:
Figure 7-2: Mode Selection
From Exposure Mode, select FLUORO, from Part Mode, select Pen-
etration, and then click OK.
The system switches to the Penetration mode.
Note: Please note that the Penetration mode works only in the Auto-
matic Pulse mode.
40~120 kV
30 mA
(1-plane imaging)
30 mA
(2-plane imaging)
Chapter 7 - Fluoro Imaging Modes
77
Advertisement
Table of Contents
