Table of Contents
Advertisement
Safety - Power Supply
Max. line current and technique
factors:
Highest electric power in high-
voltage circuit:
Nominal electric power:
Line-voltage regulation is based on measurements made at the input (pri-
mary winding) of the isolation transformer under standby conditions and at
maximum fluoroscopic exposure.
Percent Line Regulation = 100 (Vn - V1)/V1
Where
tential for maximum radiographic exposure.
WARNING
WARNING
XGB6-12-1014, Rev 1.04
stands for no-load line potential (standby), and
Vn
To avoid the risk of electric shock, this equipment shall only be con-
nected to the power supply with protective earth.
When another device is used together with this unit, the combination
as a whole shall conform to the standard EN 60601-1.
It is required to have the G-Arm connected to the Control Unit before
applying power to the G-Arm system.
Chapter 1 - Overview and Safety
11 A, 120 kV, 15 mA (bi-plane imaging)
1.8 kW (120 kV, 15 mA)(bi-plane imaging, peak),
1.2 kW (120 kV, 15 mA) (bi-plane imaging, maxi-
mum average)
2.3 kW (100 kV, 15 mA, 1 s)
for load line po-
V1
15
Advertisement
Table of Contents
