Table of Contents
Advertisement
Chapter 8 - Workstation Software
●
Local AE
Specifies the AE title of the G-Arm system.
●
Modality
Specifies a unique modality name for the G-Arm system.
●
Overtime
Specifies the time limit (in seconds) given to the G-Arm system for it try-
ing to establish a connection to another server before the connection
attempt is considered as a failure.
To set up network properties for the local host:
STEP 1
Figure 8-22: Set up network properties for the local host
STEP 2
Verify an application entity
You can verify the connection to the application entity using the Verify but-
ton.
122
On the DICOM Setup screen, press DICOM Server Set.
The DICOM Server Setup screen is displayed, as shown in Figure 8-22
(p128).
Note: For instructions on how to access the DICOM Setup screen, see
"Access DICOM Setup screen" (p124).
On the DICOM Server Setup screen, specify the connection settings
for the G-Arm system, and then click OK.
DICOM Setup
B6 User Manual
Advertisement
Table of Contents
