Equipment Weights; Operation Table Dimensions; Movement Controls - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Chapter 4 - Mechanical Positioning
4.1.3

Equipment Weights

Whole Product Gross Weight:
Weight of G-Arm:
Weight of Control Unit:
4.1.4

Operation Table Dimensions

Before starting the installation process of the G-Arm system, make sure the
room allocated for using the G-Arm system meets the technical, safety and
radiation protective requirements by the local rules.
The recommended dimensions of the operation table that matches the re-
quirement of the G-Arm system are described as below:
Height:
Width:
4.2

Movement Controls

WARNING
CAUTION
The G-Arm system offers a group of motor-driven positioning features, in-
cluding:
●
"G-Arm Orbital Rotation" (p48)
●
"G-Arm Radial Rotation" (p49)
●
"Image Intensifier Adjustment" (p49)
●
"G-Arm Height Adjustment" (p50)
The equipment comes with a lined movement control board for the control
of the G-Arm movements.
40
≈ 670 kg
≈ 520 kg
≈ 150 kg
≥ 605 mm
≤ 850 mm
When positioning the G-Arm, observe the warning symbols attached
to the equipment and observe the moving assemblies to ensure the
safety of the patients and hospital personnel.
When the G-Arm system is in the Off state, the G-Arm will not respond
to any control commands even with the circuit breaker being switched
on.
Movement Controls
B6 User Manual