Table of Contents
Advertisement
Positioning the Monitors
To lock/unlock the G-Arm:
STEP
4.12
Positioning the Monitors
From the neutral position, the viewing monitor assembly of the G-Arm sys-
tem can be rotated 180° to either direction for optimal viewing.
You can manually adjust the contrast and brightness for better display qual-
ity. These settings will retain until they are changed again.
WARNING
CAUTION
XGB6-12-1014, Rev 1.04
1
Unlocks the wheel brakes on the steering unit to
allow the wheels to roll
2
Locks the wheel brakes on the steering unit
Press down either of the brake pedals. To unlock it, press it again.
Touch only the indicated positions to position the monitors. Pulling on
other parts of the monitor assemblies during monitor positioning
might cause damages to the monitor assembly.
Clear all the obstacles within the moving range of the viewing moni-
tors to make sure the monitors do not collide with any objects.
Do not drape cables or clothes over the monitors. Pulling a cable or
clothes draped over the monitor assemblies could cause the monitors
to move unexpectedly.
Figure 4-15: Positioning the viewing monitors
Chapter 4 - Mechanical Positioning
51
Advertisement
Table of Contents
