Table of Contents
Advertisement
Touch-screen Controls
5.3
Touch-screen Controls
The control monitor provides a touch-screen for interacting with the Work-
station software. Using the touch-screen (and the keyboard for text-entry)
you can:
●
Enter and view patient information
●
View and process images/videos
●
Set imaging parameters
●
Annotate, compare, zoom, or rotate images
●
Print images
●
Generate dose summary reports
For detailed information, please refer to the chapter "Workstation Software"
(p87).
5.4
Collimator
The collimator is a fully automatic, microprocessor controlled device de-
signed to provide accurate X-ray collimation. The collimator automatically
adjusts itself upon SID (source to image distance) change. The collimator can
be manually adjusted through corresponding collimator keys on the control
panel.
The collimator will automatically adjust its aperture to control the X-ray field
according to the current SID value.
XGB6-12-1014, Rev 1.04
Figure 5-7: Control Unit Monitors
1
Viewing monitors
2
Control monitor with touch-screen
3
Control panel with two LCD screens
4
Keyboard drawer
Chapter 5 - Operating Controls
59
Advertisement
Table of Contents
