Delete An Image - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Chapter 8 - Workstation Software
You need to have the settings properly configured to establish a connection
to the server. For instructions on this topic, see "DICOM Setup" (p124).
To transfer an image to the PACS server:
STEP 1
STEP 2
STEP 3
8.13.6

Delete an image

A single study can contain up to 300 images. You can discard the unwanted
images and remove them from the study.
Note: This feature is only available for the images in the currently unsaved
study.
To delete an image or all the images within the study:
STEP 1
STEP 2
114
DICOM Transfer: Transfer one or more images in the current study to
the PACS server.
Stay in the current study, or open an existing study.
On the tools panel, press
Note: If on the tools panel you cannot find the DICOM Transfer tool
button , press
The icon of the DICOM Transfer tool button changes to
cating that the image transferring process can be started at any
time.
In the image list, select one or more images, and then click
The selected image(s) in the current study will be transferred to the
PACS server.
Delete Current Image: Deletes the currently selected image.
Delete All Images: Deletes all the images the current study contains.
In the current study, do one of the following:
●
select an image, and then press
selected image
●
press to delete all the images within the study.
Press OK to confirm the deletion.
Managing Images and Studies
.
to show more buttons.
to delete the currently
, indi-
.
B6 User Manual