Table of Contents
Advertisement
Chapter 4 - Mechanical Positioning
4.6
G-Arm Height Adjustment
WARNING
The G-Arm as a whole can lift itself up by at most 300 mm by means of ver-
tically extending and retracting the main support beam that prop the G-
shaped arm.
The elevation of the G-Arm is motor-driven. You can use the control keys on
the line control increase or decrease the height of the G-Arm.
Anticollision device
Top of X ray tube assembly in AP direction and LT direction. There are anti-
collision devices installed. In the process of G-arm elevation, if the anti-colli-
sion flip-flop (Fig. 1 below) mounted in the position of X-ray emission circu-
lar hole touches the operating table or other objects, the anti-collision flip-
44
When positioning the vertical columns of the G-Arm, observe the mov-
ing assemblies to ensure the safety of the patients and hospital per-
sonnel.
Figure 4-8: Elevating or lowering the G-Arm
G-Arm Height Adjustment
B6 User Manual
Advertisement
Table of Contents
