Table of Contents
Advertisement
Trouble-shooting
11.1
Trouble-shooting
The G-Arm system performs a self-check during power-up and displays a
message on the LCD screens if any fault is detected, as described in the fol-
lowing table:
Table 11-1: Error Codes and Solutions
Error Code
E01
E02
E05
E06
E07
E09
E11
XGB6-12-1014, Rev 1.04
Description
Power Malfunction
X-ray Tube Overheat
Filament Power Supply
Malfunction
Inverter Malfunction
Focus Selection Error
CPU Malfunction
Rotation Anode Error
Chapter 11 - Trouble-shooting
Solution
First check the output of AC power
supply, then check the output of
DC power supply, or call the service
Shut down, do not turn the system
on until the X-ray tube cools down
Call the service
143
Advertisement
Table of Contents
