Symbols And Nameplates; Equipment Malfunction; Responsibility - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Table of Contents

Advertisement

Chapter 1 - Overview and Safety
CAUTION
1.11

Symbols and Nameplates

Various symbols, labels, and signs are fixed to or printed on the surface of
this product to provide you with additional information including warnings
and/or safety information.
For descriptions of these symbols, labels, signs and nameplates, see Appen-
dix I: "Symbols & Nameplates" (p163).
1.12

Equipment Malfunction

In the event that the system circuit breaker trips, which may indicate a sys-
tem malfunction, do not attempt to operate the equipment and contact the
manufacturer or the service engineer authorized by the manufacturer.
1.13

Responsibility

Regardless of the particular requirements set by the relevant liability stan-
dards, WHALE can be considered liable only when the following conditions
apply:
Assembly, installation, adjustment, maintenance and modifications are
performed only by WHALE personnel or by persons authorized by Bei-
jing East Whale Imaging Technology Co., Ltd.
Operations of this unit is in accordance with the instructions depicted
in the user manual with a proper version.
WHALE assumes no responsibility when the patient, the operating staff or
the third party are exposed to excessive X-ray radiation.
20
The terms of AP and LT used on the G-Arm system and in this manual
are only to indicate the X-ray plane on which the images are gener-
ated. They are not identical to the clinical terms of AP and LT.
Symbols and Nameplates
B6 User Manual

Advertisement

Table of Contents
loading

Table of Contents