Table of Contents
Advertisement
Printing Images
8.12
Printing Images
You can pick several images and print them out via a printer.
The G-Arm system supports three types of printing, including:
●
DICOM Printing
Images will be printed through a DICOM printer. This option is unavail-
able if the connection to the DICOM printer server is disconnected.
●
Ordinary Printing - Laser Printer
Images will be printed through a laser printer.
●
Ordinary Printing - Thermal Printer
Images will be printed through a thermal printer.
Which printing type is used when you press Print
Print Type selection in the system settings.
To print one or more images through a thermal/laser printer:
STEP 1
STEP 2
STEP 3
STEP 4
XGB6-12-1014, Rev 1.04
In the current study, on the tools panel to the left of the image area,
press Print
.
The Printing Setup screen is displayed (Figure 8-15 (p114) and
Figure 8-16 (p114)), allowing you to select the images to print, set the
image layout, or enlarge the image.
On the Print Setup screen, select a print layout from the four presets
(see "Print layout" (p115)).
From the image list, double-click an image to add it to the image
layout.
The image is appended to the end of the image layout. Repeat this
step until all the images that you want to print are added. You can
print at most four images at a time.
When you are done with the setup, press Print
Chapter 8 - Workstation Software
is determined by the
.
107
Advertisement
Table of Contents
