Table of Contents
Advertisement
Chapter 8 - Workstation Software
You can also access DICOM Setup screens via the System Settings screen.
To access the System Settings screen:
STEP 1
STEP 2
STEP 3
Table 8-4: System Settings
Item
Hospital Name
Print Type
116
Figure 8-19: System Settings screen
On the control screen, press System Settings
Type the system password, which by default is "123456", and then
press OK.
The System Settings screen is displayed, as shown in Figure 8-19
(p122).
Change the system settings, and then click OK to apply the changes.
Refer to Table 8-4 (p122) for descriptions of these settings.
Description
Specifies the name of the hospital. The hospital name will
be displayed in the study report.
Specifies the printer type, which can be:
●
DICOM
Images will be printed through a DICOM printer. This
value is hidden if the connection to the DICOM
printer server is disconnected.
●
Laser Printer
Images will be printed through a laser printer.
●
Thermal Printer
Images will be printed through a thermal printer.
System Settings
.
B6 User Manual
Advertisement
Table of Contents
