Safety - Operation; Safety - Power Supply - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Table of Contents

Advertisement

Chapter 1 - Overview and Safety
1.6

Safety - Operation

WARNING
CAUTION
CAUTION
DANGER
Notes
No user-serviceable parts are provided within the unit.
None of electronic objects or parts of the unit (fuses, circuit breaker, etc.)
shall be replaced or repaired by the hospital. Only service personnel autho-
rized by Beijing East Whale Imaging Technology Co., Ltd. are allowed to
perform these operations.
Only operate the control unit in a ventilated environment.
Do not operate the control unit near strong magnetic fields. Keep the G-Arm
system away from devices that generate strong magnetic fields. Such devic-
es include MRI unit, microwave oven, speaker, etc.
The additional equipment that is required to work with the G-Arm system
must conform to Standard EN 60601-1.
In the event of system failure, immediately cease the operation of the G-Arm
system and call the responsible service technician for help.
1.7

Safety - Power Supply

Power Supply Requirement:
Power:
Rated Line Voltage:
Line-voltage Regulation:
14
The appropriate X-ray imaging exposure parameters should be consis-
tent with established Federal and Provincial/State radiation protection
practices and medical imaging standards in the local institution.
Do not use the system in unsafe conditions (smoke, fire, etc.), which
can lead to hardware failure.
To avoid damaging the unit, do not place anything, especially heavy
objects or liquid contents on top of the unit.
The unit should be placed on stable and level ground.
220/230 VAC, 50/60 Hz, 15 A
2500 VA (Momentary), 800 VA (Long-time)
220/230 VAC
2% in bi-plane imaging (120 kV, 15 mA)
Safety - Operation
B6 User Manual

Advertisement

Table of Contents
loading

Table of Contents