Chapter 5 - Operating Controls
Key
Description
Reset accumulated Single Study Fluoros-
copy Time
Reset the image parameters to factory settings. The following image settings will be reset:
Sharpening, Noise Reduction, Brightness, Contrast, Rotation, Inversion, and Mirror.
5.2.1
Adjust the voltage/current values
Fluoroscopic imaging is activated by pressing the relevant foot switch or the
key on the control panel.
To manually set the kV or mA values, you can use the triangular shaped ar-
row keys beneath the LCD screens of the control panel. Use the keys (1) be-
neath the kV readings to adjust the kV values, and use those (2) beneath mA
to adjust the mA values, as below:
5.2.2
Adjust the FoV
You can generate an image in three different FoV (Field of Vision) sizes.
To select the FoV size, on the control panel, press the FoV selection key
to switch among the three sizes, which are described in the following table:
Field Size
9 inches
6 inches
4.5 inches
58
Key
Figure 5-6: kV/mA adjustment keys
1 kV adjusting keys
2 mA adjusting keys
FoV Indicator
Level of Magnification
1× (this FoV size is by default selected)
1.5×
2×
Description
Take an exposure
Control Panel
B6 User Manual