Panoramic Imaging - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Panoramic Imaging

8.7 Panoramic Imaging
In addition to ordinary images, the G-Arm system can also generate a pan-
oramic image by combining several fluoroscopic images of the adjacent
parts.
It takes at least two persons to complete the panoramic imaging. One per-
son moves the G-Arm while the other conducts the exposure at the same
time.
CAUTION
To generate a panoramic image:
STEP 1
STEP 2
STEP 3
STEP 4
XGB6-12-1014, Rev 1.04
The G-Arm system support panoramic imaging from both two direc-
tions individually or simultaneously.
Press .
From Exposure Mode, select PANO.
The system activates the Panoramic Imaging mode.
Create a new study and press the footswitch pedal or the Exposure
key on the control panel, in the meantime, move the G-Arm (the
other person).
The system initiates the exposure process. Meanwhile, a Stop but-
ton appears on the control screen, which will remain visible until
you click on it or the panoramic imaging process automatically
ends.
During the exposure, if you need to adjust the G-Arm position or the
exposure parameters, you can always pause the exposure, perform
the adjustments, and then resume the exposure.
To generate a panoramic image, you can click the Stop button after
you end the exposure. Or, you can continue with the exposure, until
it automatically ends.
The maximum duration time for the panoramic imaging allowed by
the G-Arm system is as follows:
Mode PPS Max. Frame Count Max. Exposure Duration
Continuous mode 25
Pulse mode 15
The G-Arm system combines the images, generate a complete pan-
oramic image, and then displays it in the Image area.
Chapter 8 - Workstation Software
150 6 sec.
150 10 sec.
95