Add A Dicom Service - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

DICOM Setup
STEP 3
8.17.1

Add a DICOM service

You need to set up a connection to the DICOM service before binding a
workstation feature to it.
To set up a connection to a PACS server:
STEP 1
STEP 2
STEP 3
The DICOM service list displays the DICOM services that are currently avail-
able. To modify a DICOM service, double-click on the service, and then edit
the service parameters on the pop-up dialog.
XGB6-12-1014, Rev 1.04
On the System Settings screen, press DICOM Setup.
On the DICOM Setup screen, press DICOM Server Set.
The DICOM Server Setup screen is displayed, which lists all the avail-
able DICOM services that have been configured.
Note: For instructions on how to access the DICOM Setup screen, see
"Access DICOM Setup screen" (p124).
On the DICOM Server Setup screen, press Insert Item.
On the dialog that pops up, specify the AE title, IP and port of the DI-
COM service, and then press OK.
The new DICOM service is appended to the end of the DICOM Ser-
vice list.
Figure 8-20: Add a DICOM service
Chapter 8 - Workstation Software
119