Changing Password; Quitting Workstation Software; System Settings - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Changing Password

8.14 Changing Password
The default system password for quitting the workstation or accessing ad-
vanced settings is "123456".
To change the system password:
STEP 1
STEP 2
8.15

Quitting Workstation Software

CAUTION
You can quit the workstation software and return to Windows desktop.
To quit the workstation software:
STEP 1
STEP 2
8.16

System Settings

You can set the default values of some functions or turn on/off certain fea-
tures using the System Settings screen.
XGB6-12-1014, Rev 1.04
On the keyboard, press Alt-F3.
On the Change Password dialog, type the old password, type the
new password twice, and then click OK to confirm the change.
Please follow the instructions described in this section to quit the work-
station software. Do not terminate the Workstation software by force.
Failure to follow this message could cause unexpected data loss.
Clear the image area by dismissing all the dialogs, lists, or studies
displayed on the center of the control screen.
Press Alt-F4, type the password on the dialog that appears, and
then click OK.
Notes
●
If the key combination does not bring out the password dialog,
check whether you have dismissed all the dialogs and had the im-
age area cleared.
●
The default password for quitting the Workstation software is
"123456".
Chapter 8 - Workstation Software
115