Combine With A Dicom Service - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Chapter 8 - Workstation Software
8.17.2

Combine with a DICOM service

You need to specify a configured DICOM service to a feature in the G-Arm
workstation software before this feature can function.
Note: You need to set up a connection to the DICOM service in advance. For in-
structions on this topic, see "Add a DICOM service" (p125).
To combine a workstation feature with a DICOM service:
STEP 1
STEP 2
120
Access the DICOM Setup screen.
Note: For instructions on how to access the DICOM Setup screen, see
"Access DICOM Setup screen" (p124).
The DICOM Setup screen lists the G-Arm workstation features and
their DICOM binding settings, as shown in Figure 8-21 (p127).
Find the feature you want to bind and click/tap in its Content cell.
A drop-down list pops up, listing all the available configured DICOM
services.
The following table explains the mapping relationship between the
Item column and the workstation feature, as well as some image
settings.
DICOM Setup
B6 User Manual