A(I)-1 Symbols - Whale MultiScan G-Arm System XGB6-12-1026 User Manual

Symbols
A(I)-1 Symbols
Table I-1: Symbols used on this unit (Sheet 1 of 3)
Symbol Description
Warning: Dangerous voltage
Warning: Crushing hazard - foot On the surface of the bottom main girder
Warning: Crushing hazard -
hand
Warning: Crushing hazard -
body
Warning: Ionizing radiation
Protective earth (ground)
AC power input
AC power input
Focal spot
Emergency stop
Stepping prohibited
XGB6-12-1026, Rev 1.04
Appendix I - Symbols & Nameplates
Location
Near the power inlet terminal
and on the surface of the wheel buffers
Near the back cover of the image intensifier
On the surface of the lateral image intensi-
fier's side
On the cover of the tube assembly
Near the protective earth (ground) terminal
and protective earth (ground) copper bar
Beside Circuit breaker input
Beside Circuit breaker input
On the side cover of the tube assembly, cor-
responding to the focus position of the tube
assembly
On the surface of the outer cover of the con-
trol unit and the back of the G-Arm base, on
top of the emergency stop
On the surface of AP tube assembly
159