Optional Hardware And Software; External Pumps (Option 10); Rack Mount Kits (Options 20-23); Current Loop Analog Outputs (Option 41) - Teledyne 200E Instruction Manual

Model 200E Instruction Manual

5. OPTIONAL HARDWARE AND SOFTWARE

This section includes a descriptions of the hardware and software options available for the
Model 200E Nitrogen Oxides Analyzer. For assistance with ordering these options please
contact the sales department of Teledyne - Advanced Pollution Instruments at:

5.1. External Pumps (Option 10)

The M200E comes equipped with an external pump specified upon ordering. Whereas the
analyzer can be re-configured for other voltages, operation at other than the original
voltage/frequency may require a different external pump. A variety of external pumps are
available for the M200E series analyzers. The range of available pump options meets all
typical AC power supply standards while exhibiting the same pneumatic performance.
T-API Part No.
009810300
009810400
009810500
009810600
009810700

5.2. Rack Mount Kits (Options 20-23)

There are several options for mounting the analyzer in standard 19" racks.
Option Number
OPT 20A
OPT 20B
OPT 21
OPT 23

5.3. Current Loop Analog Outputs (Option 41)

This option adds isolated, voltage-to-current conversion circuitry to the analyzer's analog
outputs. This option may be ordered separately for the first three of the analog outputs and
can be installed at the factory or added later. Call T-API sales for pricing and availability.
The current loop option can be configured for any output range between 0 and 20 mA (for
example 0-20, 2-20 or 4-20 mA). Information on calibrating or adjusting these outputs can
be found in Section 6.7.6.
044100102 Rev A
TOLL-FREE: 800-324-5190
TEL: +1 858-657-9800
FAX: +1 858-657-9816
E-MAIL: apisales@teledyne.com
WEB SITE: http://www.teledyne-api.com/
External pump for 115 VAC / 60 Hz power supply
External pump for 230 VAC / 50 Hz power supply
External pump for 110 VAC / 50 Hz power supply
External pump for 100 VAC / 50 Hz power supply
External pump for 220-240 VAC / 50-60 Hz power supply
Rack mount brackets with 26 in. chassis slides.
Rack mount brackets with 24 in. chassis slides.
Rack mount brackets only
Rack mount for external pump (no slides).
Optional Hardware and Software
Description
Description
33