Optional Hardware And Software; Rack Mount Kits - Teledyne 400E Instruction Manual

Model 400E Ozone Analyzer
Instruction Manual

5. OPTIONAL HARDWARE AND SOFTWARE

This section includes a brief description of the hardware and software options
available for the Model 400E.
For assistance with ordering these options please contact the Sales department of
Teledyne – Advanced Pollution instruments at:
Throughout this chapter are various diagrams showing pneumatic connections
between the M400E and various other pieces of equipment such as calibrators and
zero air sources. These diagrams are only intended to be schematic
representations of these connections and do not reflect actual physical locations of
equipment and fitting location or orientation. Contact your regional EPA or other
appropriate governing agency for more detailed recommendations.

5.1. Rack Mount Kits

There are several options available for rack mounting the Analyzer.
Option Number
OPT 20A
OPT 20B
OPT 21
Each of these options, permits the Analyzer to be mounted in a standard 19" wide x
30" deep RETMA rack.
P/N 04316 Rev: B
TOLL-FREE: 800-324-5190
FAX: 858-657-9816
TEL: 858-657-9800
E-MAIL: apisales@teledyne.com
WEB SITE: www.teledyne-api.com
Rack mount with Chassis Slides 26 in.
Rack mount with Chassis Slides 24 in. STD
Rack mount WITHOUT Chassis Slides
Optional Hardware and Software
NOTE
Description
47