Door Gasket Removal And Replacement; Kick Panel Removal And Replacement - Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02

6.11.11 Door Gasket Removal and Replacement

Be sure to check QuickFinder for relevant information,
documentation, and the correct part number when replacing this
component.
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 25.
2. Remove oven door (see Oven Door Removal, Installation,
page 110).
3. Starting from one end of the gasket while carefully working your
way to the other end, gently pull the gasket clips out of the
receptacles on the oven frame (see Figure 222).
4. After replacing the gasket, check to make sure the door is
positioned correctly, and closes with a tight fit.
Figure 222: Gasket on Typical Oven Cavity
58300000163852_ARA_EN_C

6.11.12 Kick Panel Removal and Replacement

Be sure to check QuickFinder for relevant information,
documentation, and the correct part number when replacing this
component.
Figure 223: Typical Kick Panel
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 25.
2. Remove the oven door(s). See Oven Door Removal, Installation,
page 110.
NOTE: The wiring diagram for the range is located on the back
side of the kick panel (see Wiring Diagram, page 6).
Page 121 of 123