Removing Maintops - Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
m
Caution
Fragile Component
The electrode is a fragile component that can crack easily.
7. If the electrode needs replacing, remove and retain the small T-10
screw to detach it from the brass burner base. If not, leave it
attached to the brass burner base.
8. Remove and retain the black T-30 screw that secures the pedestal
onto the maintop, and then lift out the pedestal with the Venturi
tube still attached, while gently pushing the ignition wire through
(see Figure 19).
-OR-
Alternatively, you can first lift the Venturi tube out from the
pedestal burner, before removing the pedestal burner from the
maintop.
Figure 19: Pedestal Burner and Venturi Tube
1 Venturi tube
58300000163852_ARA_EN_C
6.3.2

Removing Maintops

Be sure to check QuickFinder for relevant information,
documentation, and the correct part number when replacing this
component.
m
Caution
Fragile Component
Porcelain enamel maintops (spill trays) are fragile, so do not over-
torque spill tray screws to avoid damaging the porcelain.
1. Push each ignition wire downward through its respective
receptacle, as you carefully lift out each maintop (see Figure 20).
Figure 20: Typical Maintop
Page 27 of 123