Display Module Components And Oven Light Switch For Steam Oven - Removal And Replacement - Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
6.7.8 Display Module Components and Oven Light Switch for
Steam Oven – Removal and Replacement
To replace the oven light switch and/or display module for the
steam oven, assess is from the top of the range.
Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing this component.
Figure 58: Display Module for Steam Oven
1 Button guide
2 Nuts (5)
3 Button board (printed circuit board)
4 Sleeves (10)
5 Grounding wire
6 LCD
7 LCD board (printed circuit board)
8 Opening for light switch
9 Bracket
58300000163852_ARA_EN_C
Figure 59: Display Module for Steam Oven (Shown from Back Side of
Control Panel)
1 Screws (2) holding bracket onto control panel
2 Standoffs (4) securing button guide to button board
3 Light switch
4 Sliding wire connector
5 Multi-pin connector
6 Sliding wire connector
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 25.
2. Follow all steps in Accessing Components under the Maintop,
page 25.
Page 44 of 123