Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
Figure 218: Removing an Element Bracket Screw
1
Screws (one on each of the two element brackets)
Figure 219: Removing Only the Element
58300000163852_ARA_EN_C
6.11.9
Door Interior Cleaning
This procedure is for the large oven door only.
In the event of spillage that seeps into the top vents of the large oven
door, the spillage may get trapped inside of the door assembly, and
may require cleaning.
NOTE: Clean the oven door only when it is safe to do so; for example,
when the door is cool enough to handle.
Figure 220: Bottom Vent on Oven Door (Typical Door Shown)
1
Vent at the bottom of the oven door
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 25.
2. Remove door (see Oven Door Removal, Installation, and
Alignment, page 110).
3. Place the door on a safe, protective surface, where the door
surfaces will not get scratched.
Page 119 of 123