Display Module Components And Oven Light Switch For Large Oven - Removal And Replacement - Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
6.9.20 Display Module Components and Oven Light Switch for
Large Oven – Removal and Replacement
To replace the oven light switch and/or display module
components for the large oven, access is from the top of the range.
Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing these components.
Figure 169: Display Module for Large Oven
1 Button board (printed circuit board assembly)
2 Button guide
3 Nuts (5)
4 Sleeves (5)
5 LCD
6 LCD board
7 Opening for light switch
8 Bracket
58300000163852_ARA_EN_C
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 25.
2. Follow all steps in Accessing Components under the Maintop,
page 25.
3. Rotate the oven light switch bezel counter-clockwise to remove it
(see Figure 170).
HINT: If the bezel does not rotate easily by hand, use a wrench
with protective cloth to avoid scratching, or a strap wrench. See
Figure 170.
Figure 170: Oven Light Switch Bezel
1 Oven light switch bezel
2 Screw to remove display module
3 Screw to remove display module
Page 96 of 123