Actuator For Steam Oven - Removal And Replacement - Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
5. Remove and retain the screw securing the steam oven power
module onto the chassis (see Figure 50).
Figure 49: Connectors on the Steam Oven Power Module
1 Spade connectors (3)
2 Wire connector
Figure 50: Screw to Remove on Steam Oven Power Module
1 Screw
58300000163852_ARA_EN_C
6.7.6 Actuator for Steam Oven – Removal and Replacement
Be sure to check QuickFinder for relevant information,
documentation, and the correct part number when replacing this
component.
Figure 51: Actuator Access Panel
1 Wire connector on control board to detach
2 Access panel for actuator
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 25.
2. Follow all steps in Accessing Components under the Maintop,
page 25.
3. Remove the corresponding access panel.
Page 41 of 123