Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
Figure 238: Inner Panel and Screws
1
Screws (4)
2
Inner panel
Figure 239: Removing the Hinge
58300000156573_ARA_EN_B
4.7.10 Door Gasket Removal and Replacement
Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing this component.
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Remove oven door (see Oven Door Removal, Installation,
page 88).
3. Remove and retain the screws on the bracket, and then remove
the bracket (see Figure 240 and Figure 241, page 118).
Figure 240: Bracket
4. Starting from one end of the gasket while carefully working your
way to the other end, gently pull the gasket clips out of the
receptacles on the oven frame. See Figure 242, page 118.
5. After replacing the gasket, check to make sure the door is
positioned correctly, and closes with a tight fit.
6. Re-install the bracket.
Page 117 of 119